You may not know much about transfer cases, but if you have a 4-wheel drive vehicle, you’ve got one. It makes sure you have power available for both the front and rear axles. For example, if you have a rear-wheel drive SUV, power goes to the rear wheels until you need 4-wheel drive. That’s when the transfer case steps in and transfers some of the power to the front wheels as well. You might use a shift lever to go into 4-wheel drive, or it could be a button on the dash or it might even go into 4-wheel drive automatically, depending on your vehicle.
The transfer case is serviced by periodically draining its fluid and replacing it with fresh fluid. At Olathe Clutch and Transmission, we will also check for leaks and damage. Transfer case fluid cools and lubricates the gears, chains, bearings, shafts and other parts. Over time, the additives in the fluid wear out and it doesn’t protect as well. Also, bits of metal and clutch material wear off and contaminate the fluid. There is no filter in the transfer case, so if the contamination is allowed to stay for too long, it’ll further accelerate wear.
There are several things that affect how often you should change the fluid, for example, how much you use 4-wheel drive. If you drive in wet environments like crossing streams or through mud and snow, you might need to have your fluids drained more often.
Transfer case parts will eventually wear out and you’ll have to make repairs. But properly servicing your transfer case will keep that day as far in the future as possible, so bring your four-wheel drive vehicle in to Olathe Clutch and Transmission so we can help you get the most out of your vehicle.